Ritherdon Online Shop Product Blog

Single Compartment and Two Compartment Cabinet Guide

Single Compartment and Two Compartment Cabinet Guide

This guide will help you choose between cabinet sizes and let you know when there's a single compartment option available and if there is also the similar sized cabinet available with two compartments.            Two compartment means that the cabinet has internal separation and the compartments are individually lockable. We'll be going through the RB Cabinets, RMC Cabinets and Power Supply Enclosures: Single Compartment (No Internal Separation) Two Compartment (Segregated Internally & Lockable) RB Cabinets: RB460 to RB1550 PS60 PS300 and TBS60 TBS300* RMC1600,RMC1900, RMC2100 PS60 PS300 and TBS60 TBS300* Similar Sizing  Similar Sizing RB1250 Cabinet PS60 Permanent Supply RB1250...

Read more →


RB Cabinets in Natural Stainless Steel Finish

RB Cabinets in Natural Stainless Steel Finish

RB Cabinets left unpainted will always be made out of a higher grade of stainless steel, than our most commonly used 4003 grade of stainless steel (which is always powder coated).Unpainted RB cabinets natural finish are always made out of 304 or 316 stainless steel. 304 and 316 grades of steel have better resistance to harsher environments than painted 4003 grade of steel. The highest grade of stainless steel we have available is 316, which is marine grade with high levels of corrosion resistance. Please bear in mind that 304 and 316 grade of stainless steel will always be slightly...

Read more →


Design Features of Outdoor Electrical Cabinets: RB Cabinets

Design Features of Outdoor Electrical Cabinets: RB Cabinets

RB cabinets are floor standing, electrical enclosures made from stainless steel and designed to be used outdoors. They are able to withstand the elements 24/7. They are used for housing electrical equipment and come fitted with a wooden backboard for mounting the electricals easily. Design Cabinets have an open base, used for feeding cabling and ducting through so that all electrical equipment inside can be connected to the power supply below ground. Equipment will be kept protected and dry, as the cabinet door is all around with gasket and the door shuts tightly creating a seal that keeps water out of the...

Read more →


Need extra security for your RB Cabinet? Add Three Point Locking to Order

Need extra security for your RB Cabinet? Add  Three Point Locking to Order

Opt for a three-point locking system and add it to your cart when ordering your RB cabinet. Available for all sizes of cabinets.  Standard locking system for all power supply enclosures: PS60, PS300, TBS60, TBS300 and all RMC cabinets.  The three-point locking system comes with padlocking 'L' handle and padlock shroud. Includes latch rods with rollers for easy closing. Please note that this is not a retro-fit option and must be ordered with your cabinet. Padlock shroud for added security. Padlock not supplied. Fits 10mm padlock shackle. This is how a fitted padlock looks under the padlock shroud:  

Read more →


Please order Optional RB Plinths Separately

Electrical Enclosures Installation

Please order Optional RB Plinths Separately

RB Plinths are optional for the installation of RB Cabinets.  To make them stand out as optional, we have separated them from the RB cabinets themselves, so please be sure to add them to your cart if you need a plinth to install your RB Cabinet. The use of a plinth is not compulsory, but if you don’t intend to use one please make sure that the concrete base (or equivalent) is perfectly flat and as smooth as possible. Ideally, it would be a minimum of 100mm (4”) bigger than the cabinet all round, and 150mm (6”) deep.  A plinth...

Read more →