Types of New Metal Meter Boxes

Meter Box Repair

For those times where you need to install a new meter box because:

A) the extent of damage to the existing box is such that you can't repair it. Not even with a Ritherdon meter box repair unit!

B) there is no meter box to repair and you need a new installation

C) you need an alternative to plastic meter boxes

That's why we offer new metal meter boxes in 3 types of fit:

  • Fully recessed or flush mounted meter box
  • Semi-recessed meter box
  • Surface mounted meter box

For a fully recessed fit, we offer the R3 Meter box made from zinc coated steel. It is also available in 3 different size variations: Small, Medium and Large. 

Size Overall Dimensions
(Height x Width x Depth)
Wall Opening
(Height x Width x Depth)
Weight
Small 572 x 405 x 180 530 x 360 x 180 8.0 kg
Medium 657 x 460 x 180 605 x 415 x 180 10 kg
Large 722 x 545 x 180 680 x 500 x 180

14 kg

 

For a semi-recessed fit, we have the R5 meter box made from zinc coated steel. Also available in 3 size variations: Small, Medium and Large. 

Size Overall Dimensions
(Height x Width x Depth)
Wall Opening
(Height x Width x Depth)
Weight
Small 582 x 415 x 180 530 x 360 x 130 9.0 kg
Medium 657 x 470 x 180 605 x 415 x 130 10 kg
Large 732 x 555 x 180 680 x 500 x 130 13 kg

 

For surface mounted meter boxes we offer both the R6 and the R16.

The R6 is made from zinc-coated steel and comes in one size, which we call a Medium R6. (From December 2022 this product is now obsolete and replaced by our R16. Please refer to our R16 product in regards to inquires regarding the R6 in the future).

Size Overall Dimensions
(Height x Width x Depth)
Weight
Medium 620 x 420 x 200 11 kg

 

The R16 is a large size and made from stainless steel. This is our largest new meter box and due to its size it tends to be used for three-phase meter. Please check the size of your equipment and the backboard size to make sure that everything will fit inside the meter box.

 

Size Overall Dimensions
(Height x Width x Depth)
Weight
Large 695mm x 505mm x 200mm 13 kg

R3 and R5 Low stock Items

We'd like to advise that we tend to keep less stock of R3, R5 and R6 meter boxes. So if out of stock at the time of order, it may take up to 4 weeks for your order. Please give us a call if you'd like to check stock status and get a better estimate of lead times before ordering. We'll be happy to help.

 



Older Post Newer Post


Leave a comment

Please note, comments must be approved before they are published